Do you need to source trapezoidal thread tap or metric thread tap for you company regularly? Thread taps are important in component manufacturing industry. You will be required to replace the thread taps that you use in your manufacturing process, as this threading tool will wear out periodically.
Are you interested in finding the best quality metric thread taps or other thread taps for your in-house requirements? There are two types of thread taps, standard sized thread taps and custom thread taps. If it were standard thread tap, your manufacturer would have readily available stock for the obvious reasons. In case you are in need of custom thread taps then your manufacturer will not have any to supply you until you have confirmed your order.
Even after confirming the order, your thread tap manufacturer would need time to manufacture the tools. You need to therefore allow enough time for the manufacturer. Last minute orders will not work if you are going for custom metric thread taps or custom trapezoidal thread taps.
Based on the extensiveness of use, the wear and tear, you need to have your own thread tap replacement cycle. This will save you from threading wrong sizes or producing components with faulty threads.
If you could identify a manufacturer that you could count on for your current and future needs, you could place a blanket order and have your thread taps delivered to you in a periodic interval. When you are placing such orders, you need to take into account both wear and tear and breaking of the thread taps so that with each batch your manufacturer delivers you with adequate number of thread taps.
As you would need your thread taps in an ongoing fashion, you could hold surplus stocks so that even if there were any breakages of the thread taps or faster wear and tear, your processes would not be stalled just for the want of thread taps.
Thread taps should be made of toughened steel and the finest quality raw materials should be used in the manufacturing process. If the quality of the raw materials used is not going to be up to the standard, then the quality of the thread taps will also not be good.
If you have experience threading with thread taps, you would know how things could turn out to be a nightmare. If you use inferior quality thread taps the tool could break during the threading process to frequently and if the broken piece is stuck inside the component then it will delay your manufacturing process very badly. You need to remove the broken piece of the broken thread tap without damaging the component. This runs the risk of damaging the component. You cannot have too many such instances in your manufacturing cycle and that is why it becomes vital to choose the finest quality thread taps for your threading needs. Quality matters the most when buying your thread taps for your ongoing needs.